Products

Emergency Management Barrier Gate

The patent pending Safe-Crossings Barrier Gate is designed to be manually extended to a distance up to 50' long.   In its home position, the gate is a trim 20' long.   The gate is designed to be either permanently mounted on a concrete base that is 48" deep or be mounted to a trailer - either singularly or in tandem - for rapid deployment to a crisis location.

Permanent Installations:
The permanently mounted gates are installed at known flood zone boundaries, bridges, exit ramps, roads prone to snow closure, and even city streets where annual street fairs are held.   Typically these gates are deployed on an exception basis where traffic flow must either be stopped or diverted.

Vehicle Mounted Gates

The patent pending Safe-Crossings "Hitch Gate" can be mounted to any standard trailer hitch and is designed to extend up to 15'. Weighing only 33 pounds and fully deployable in seconds, it is ideal for fire engines, power utility trucks, and emergency responders when there is an immediate need to block the road.

Trailer Mounted Gates

The trailer mounted gates are typically deployed to emergency situations (fires, automobile accidents, floods, etc); construction sites needing work zone separation / isolation, airport work and storage zones, and any place traffic must be either stopped or diverted on an as needed basis.

All of the Barrier Gate systems are also highly resistant to tampering and meddling where vandalism is a problem.

Highway-Rail Crossing Gate

The patent pending Safe-Crossings Highway-Rail Crossing Gate is designed to fully extend across all traffic lanes and shoulders within 15 seconds.   This provides safe, economical, and reliable "Four Quad" safety protection on highway-rail crossings up to 50' in length.   As part of our mission statement our objective is to reduce fatalities and prevent accidents that are a result of a collision between vehicles and trains. This unfortunately happens more often than we would like.

The Safe-Crossings Highway-Rail Warning Gate was designed for these specific applications:

  • Overhead obstacles such as electric wires and catenaries
  • High Winds
  • Long reaches to the middle of the road
  • Full Four Quad closure from one side of the road
  • Quiet Zones / Whistle Bans

    As shown on the Highway-Rail Crossing Gate video, the Safe-Crossings Gate has no motors or electronics - the gate utilizes Gravity to extend and retract.